Making Life Simple With Wireless Technology

Title:
Making Life Simple With Wireless Technology

Word Count:
459

Summary:
Wireless fidelity , or WiFi, is an amazing technology that allows you to network your computers, office, home, etc. without the need for wires. This makes networking so much easier and less messy because wires are not used. The computers simply connect to the network via radio signals.

Because of this easiness, many businesses, schools, malls, restaurants, cafes, stores, airports and other businesses have set up wireless hot spots that allow anyone to log onto the network....


Keywords:
wireless,cellular,technology,software,hardware,data,internet,phone


Article Body:
Wireless fidelity , or WiFi, is an amazing technology that allows you to network your computers, office, home, etc. without the need for wires. This makes networking so much easier and less messy because wires are not used. The computers simply connect to the network via radio signals.

Because of this easiness, many businesses, schools, malls, restaurants, cafes, stores, airports and other businesses have set up wireless hot spots that allow anyone to log onto the network. This is amazing for individuals that need to be able to work from any location, however there are some disadvantages because hot spots can be used by unauthorized users if not adequately protected through different security safeguards.

Hot spots are relatively new, but are growing in acceptance and popularity because of the incredible access it gives to students, travelers, business people and the like. Some hot spots are free, while others charge an hourly rate.

These days, if you go to an airport or hotel you will see signs that say internet zone or hotspot and will either say free or how to pay. Because of this evolution, individuals are able to work and study wherever they are, which makes traveling and working much easier and less downtime which is very important.

Wireless networking can also be installed in your home, which means you can work in any room in your home or even outside if you so choose. Many individuals are starting to realize how much easier this makes their lives and are installing the equipment necessary for a wireless network.

To get started, you will need an Internet connection, a router, and then wireless cards for your respective computers. The router allows the Internet signal to be routed throughout the home and the wireless cards that each computer has picks up the signal which eliminates the use of wires. All of this equipment can be purchased in your local computer store or online if you are looking for extra discounts.

If you are interested in installing a wireless network in your home, office, or business, then you can do some research online and install it yourself if you know even a little bit about computers. However, if you have a lot of computers you want to connect or are unsure of what you are doing, then you might consider hiring a professional to handle your wireless solution for you.

Once you have the wireless network setup anyone in your “hotspot” will be able to log onto the server as long as they are within range. However, if you want to exclude just anyone from logging on then you can use a virtual private network, Internet Protocol Security, or other security programs that will protect unauthorized users from logging onto your network.

Locating The Perfect Laptop Computer

Laptop computers are the perfect choice for people on the go. They offer all of the features of a desktop personal computer with the added benefits of portability. There are many kinds of laptop computers to choose from. When choosing a new laptop computer, look at the battery size, the memory and the physical size and weight of the computer.

When looking at new laptop computers, one thing you should consider is the battery size. All laptops come with a rechargeable battery. However, each laptop is different. Some batteries are designed to last longer than others. In general, a laptop computer battery will only last around two hours before needing to be recharged. As the computer ages and the battery gets older, the battery capacity will decrease. After approximately 1,000 charge and discharge cycles, the battery can no longer hold a charge. This usually equals about three years of normal laptop use. If you do not use the laptop often, the battery will become ineffective in about four years. If you plan on using the computers’ battery over plugging the laptop into the wall, the best piece of advice is to look for a laptop that has the largest battery life. Also, it is recommended to keep the laptop computer plugged in when possible so the battery does not constantly have to recharge itself. A second battery can also be purchased to use when the first battery runs out of charge.

Memory size is another key factor in choosing laptop computers. Memory size also varies from laptop to laptop. The amount of memory you purchase will depend on what you are using the computer for. If you need to store a vast amount of information on your computer or need to store pictures or video, you will need a larger amount of memory. Most new laptop computers come with a large amount of memory space already installed. Look for a minimum of 512 MB of memory. If you will need more memory space, check to see if the new laptop you are purchasing comes with expansion slots for more space.

Consider the weight of the laptop computer before purchasing. Laptops come in different sizes and some weigh a lot more than others. If you travel frequently or have the need to carry your laptop with you all day, consider a lighter weight laptop computer. Beware though, that while the laptop may be lighter, some of the components such as the AC adapter may not be included on the spec listing. Also, some of the ultra-light laptops do have smaller keyboards and screens, some only measuring 12 inches. Any laptop computer with a screen more than 15 inches can be difficult to carry. Consider the weight of the laptop when it is placed in a carrying bag, too. This will also add to the bulkiness of traveling with your laptop.

Other considerations to make when purchasing your new laptop are added features such as WiFi access, brand name and warranty. Most laptops come with a one-year warranty. An added warranty may be a good idea to protect your purchase.

How To Find Amazing Laptop Deals

Laptop computers are becoming increasingly popular because of their easy portability. A laptop is ideal for those who must travel because of their jobs or for those who work away from their desk. College students also use laptop computers for their studies. It is not difficult to find good laptop deals. Electronic stores and the Internet are all perfect places to look for laptop deals. Before purchasing a new computer, research the many laptop deals that can be found in electronic stores. Look in the weekly sales ads and compare the sales from week to week. As the technology for laptops increases, the prices of laptops are starting to drop. Laptop deals are readily available with manufacturer rebates. Rebates, combined with a good sale price can give consumers an excellent deal on a new laptop. If you purchase a laptop deal that comes with a rebate, it is important to follow all of the directions on the rebate to get the rebate check. Read the rebate offer carefully to make sure that the purchase is eligible. Some rebates are very specific and require certain software purchases in addition to the laptop. Also, make sure to send the paperwork off on time. Rebates for laptop deals will be ineligible if it is not postmarked on the correct day. Follow all of the instructions on the laptop rebate and be sure to make copies for reference. Also, remember that laptop rebates often takes several weeks. Another way to get a great laptop deal is to shop around. Do not settle for the first sale you see. Look at all ad circulars for you local electronic stores and compare the prices. Be certain that the laptop you are looking for is the exact same as in the ad. Laptops can be very similar, even with the same brands. There are usually small things, such as different software that makes the price on laptop deals different. To compare laptop deals easily, check the Internet. There are several websites on the Internet that will do the comparison shopping for you. Simply put in the model number of the item you are looking for and the website will generate prices from different stores. Often the prices that these websites generates are the sale prices that are found in the weekly sales circular, but the prices are listed side-by-side for easy comparison. This method of shopping helps you find the best laptop deals. Getting a good laptop deal is also easy when you search the Internet. Even large electronic stores sell their products on the Internet. Some often have sales that are only available through their website. If you do choose to purchase a laptop from the Internet, make sure you are making the purchase through a reputable dealer. Be wary of any website where you do not know for certain that the laptop is a brand name or if the laptop deal seems too good to be true. If you are uncertain about the reputation of an online dealer, it is usually better to research the company or go with another store.

What makes Toshiba Laptops so good?

Toshiba laptops have a well-deserved reputation for being some of the best laptops in the world. But what makes them so good? Well, first of all, Toshiba laptops are very sturdily built. If you drop one, it won’t usually break, nor will they break through normal wear and tear like cheap Dells can – Toshibas don’t get cracked cases and have keys fall off the keyboard, and if they ever did then Toshiba would fix it very quickly. This high build quality is important to people who will have their laptop for a long time, as well as people who travel around a lot with their laptops and so need to take them as luggage on planes. Secondly, Toshiba laptops are very light. Again, this is important to travellers, but it is also important to people who are just using their laptop normally, carrying it from home to their office or simply perching it on their lap at home. Heavy laptops can be a real pain, making it feel like an effort to pick up the computer and quickly check or alter something, while light ones are far more practical. However, as with other Japanese-made laptops, this extra sturdiness and ultra-light weight comes with a price. Toshiba laptops can be up to 50% more expensive than the cheapest models on the market with the same processor, RAM and so on, simply due to the cost of the better build quality and having to pay Japanese workers’ salaries. Computing tends to be a race to the bottom, with the cheapest computers gaining the largest market share, which leaves Toshiba courting the more computer-savvy buyers who really need a high-quality laptop for their work. If you do rely on your laptop for anything, though, you would do well to see the extra cost as an investment and consider getting a Toshiba, or a similar high-quality laptop.

Laser Technology

Laser technology is used in almost every scope of life, from the miniscule lasers in CD players to the lasers used to scan groceries in the checkout line to the massive lasers in aeronautics design. The discovery of laser technology and the subsequent building of ever-improving lasers have benefited the human race tremendously, particularly through medical advances. Medical lasers cause medical procedures to be quicker, better, and easier than their traditional counterparts. The only drawback is increased cost. In 1917, Albert Einstein was the first person to suggest the basics of what would become lasers, by discussing the theory of Stimulated Emission, which is a type of electron transition in which a photon is emitted from an atom causing a chain reaction with other atoms to repeat the action. In fact, the word laser is an acronym for Light Amplification by the Stimulation Emission of Radiation. Charles Townes, an American physicist, further developed the idea with microwave (invisible) light in the mid- to late-50’s and Theodore Maiman built the first working optical (visible) light laser in 1960. Improvements and variations on hundreds of kinds of lasers continue to be made since the 1960s. Those involved in quantum mechanics have been studying some form of lasers, either in theory or in reality, since the 1920s. Uses for laser technology are widespread and are included in such important fields as medical/surgery, communications, design, manufacturing/industry, and research. Medical/Surgery The advancement of medical lasers has vastly improved the ease and success of surgery. The cost, however, is greater than that of other treatments, though scarring is much less with lasers and lasers work much more quickly than older surgical options. Incisions are more precise and easier to control. Some medical areas in which lasers have deeply refined treatment options are in laser eye surgery, oncology, neurosurgery, cardiology, dermatology, veterinary surgery, and dental surgery. Communications Televisions, telephones/ cellular phones, and computer systems all benefit from the use of lasers. Lasers are able to carry the huge amounts of channels and frequencies required by these high-tech devices. Lasers have proven the best communication device to have in the space age. Design Lasers have transformed the world of design by making it possible for designers to perform with precision that was previously unavailable. Lasers are used to design digital and three-dimensional objects with much more ease and accuracy through scanning, cutting, copying, and digital archiving. From designing a building to designing landscape, lasers prove to be the best option for fast and easy design. Manufacturing/Industry Lasers have improved the manufacturer’s ability to produce tenfold. For example, with a laser cutter, a clothing manufacturer can have fabric patterns cut much more quickly and more accurately in no time. A jeweler has much more precision on his side when employing lasers to work on fine gems. Airplane designers can construct an aircraft much more efficiently and with greater results using laser technology. Research The use of lasers in research enables scientists to uncover much more detail and detect very slight movement when studying matter. The lasers can be tailored to only respond to certain colors or movements and, in that way, they provide much more specialized work in research environments. The world of laser technology is always expanding by producing new applications and ways to benefit people. The dependence that the modern culture has on lasers is amazing considering that it was not prevalent until the past forty years.

Know All About CD and DVD Replication

CD and DVD have revolutionized the way data is stored. Gone are the measly 1.4 MB sized floppy disks that were once the only means of data storage and transfer Today, CD and DVD have become the preferred means of data storage and transfer,. Not so long ago, the bulky video cassettes that were the only means of distributing films to the home viewer. Audio cassettes are still around but with the arrival of CD and DVD, and their superior digital quality output, the audio and video industries too have witnessed a revolution. Understandably the demand for CD and DVD replication has also skyrocketed. It’s a systematic method of transferring data from one disc to another. Data can be either in the form of files, music or software. CD and DVD can be replicated either on one side or both sides depending upon the particular requirements. CD or DVD replication is preferred over duplication when the requirement is to produce more than 1000 units of CD and DVD.. Process In a CD or DVD replication process, a glass master is created from an original master CD, which is further used to prepare molds also known as stampers. In the next step, stamper is injection moulded to create a compact disc. The disc is then coated with a thin layer of aluminum as a means of protection from any sort of damage. At the end of this, appropriate images and the company logo are imprinted onto the disc. Nowadays a lot of stress is put on the importance of eye-catching packaging. Replicated CD’s and DVD’s are therefore packaged attractively in order to draw the attention of its target audience. CD and DVD replication is of immense use to industries like: • Television networks • Movie studios • Music industry • Software developers • Video game designers • Business organizations as CD and DVD replication enable them to enhance their storage capacity by manifold times. • Advertising agencies are increasingly using CD and DVD replication services as it helps them in distributing product promotions, and collateral sales materials. Advantages • CD and DVD replication ensures quality, accuracy, quantity, and packaging of the replicated copies. • It’s more cost effective especially when the order is in bulk to get the replicas. • A replicated DVD is less prone to scratching • CD and DVD replication ensures 100% compatibility for audio and data CDs. Replicating a DVD or a CD is not something to be performed at home or at the office. It involves the use of sophisticated technology and machinery. That’s why it’s important to turn to companies which specialize in providing CD and DVD replication services to take care of your bulk replication requirements. CD and DVD replication might be a little expensive but its worthwhile if you wish to have quality and professional copies in large volumes say 100,000 to 1 million copies.

Inkjet Printers: A Brief Overview

Inkjet printers are an affordable and satisfactory option for printing documents and other images from computers. They were originally placed on the market in the late 1980’s and have improved greatly in production and cost since then. Today, high quality inkjet printers are available for as low as $70.00. The reason for the low cost is the higher cost of keeping the printer supplied with ink. This is where the real profits are for printer manufacturers. An inkjet printer uses millions of tiny dots of ink to make a word or picture. For photo printing, different variations of colored dots are integrated to create images with true-to-life color. A higher resolution of dots directly relates to increased quality of printouts. There are two major technologies at work in the choice of inkjet printers, impact and non-impact. Impact printers offer dot matrix or character printing. A dot matrix printer has a bunch of tiny pinheads that touch an ink-covered ribbon. When the pinheads impact the ribbon, the ink moves to the paper. Character printing is similar to an electric typewriter, but with more control and sharpness afforded to the printing job. Character printers are rarely used anymore because they can only print words and not other images. Non-impact printers are much more popular than impact printers, because of the advanced technology behind them. Both the widely used inkjet and laser printers belong in this classification. Non-impact printers do not actually contact the paper directly when printing. The way inkjet printers do this is by emitting jet sprays of ink to form images on the paper. This is where the name “inkjet” gets its meaning. Laser printers, the second most purchased printer after inkjet, use toner and other ingredients combined with heat to apply the ink to the paper. What is going on inside the inkjet printer? The center of the machine is the print head, which holds a multitude of ink spray nozzles to create the intricate dots on the paper. Ink cartridges contain the ink for the printer and are replaced according to frequency of use. Black ink and color ink typically comes in different cartridges with color sometimes appearing in three separate cartridges – cyan (blue), magenta (red), and yellow. Another part of the printer is the paper feeder, a tray that holds the paper to be printed and feeds it into the printer one page at a time. The choice of paper is instrumental in the resultant quality of the print. Regular copier paper will not provide as sharp a print as paper with a higher brightness level. Brightness in printer paper means being extra white, which showcases the black and colors of the ink better than a duller white. Brightness also indicates a higher level of smoothness to the paper. Another factor is the level of absorption, which is helped by pre-coated paper covered with a light film to prevent feathering caused by too much absorption. Many different qualities and finishes are available in paper intended for inkjet printer use. Inkjet printers are widely used by everyone from the common man to huge corporations. For everyday use, there are countless amounts of specialized sticker labels, invitations, fine stationery, and trifold brochures to be used specifically with inkjet printers. Whatever the printing need, the inkjet printer is likely to handle the job with excellent results.

Wordpress Version 2.0.3 Review

WordPress, the premier free open-source blogging utility, has gone through several upgrades in its life. Today it's one of the most popular blogging tools on the Internet; it's easy to use, powerful, and very versatile. It also has a very active base of skilled users who are eager to improve the product and to help out those who haven't tried it before. Though the Strayhorn 1.5 version is the favorite for many, it is not as stable or as secure as the newest version 2.0.3. The best part of the new version is the security patch; the new "nonce" security key reduces the chances of a malicious hacker finding a way into your admin panel. Besides the security patch, though, several minor bugs have been squashed with this version. Though a major upgrade to 2.1 is due out soon, the 2.0.3 is something you should definitely download and install if only because of the security fixes, which were actually backported from the major upgrade files. In addition to the 2.0.3 install, you should be aware that some bugs have already been found, and that a plugin will need to be installed to repair those bugs. If you modify any of the files that this patch plugin fixes, you'll need to either merge the changes with the new files or make those changes manually once again. You can find these issues by running a diff to locate changes; if the only changes you find are your own, then you're fine, and otherwise you'll need to merge them manually into the new files. The short list of what WordPress 2.0.3 fixes includes: •Small performance enhancements •Movable Type / Typepad importer fix •Enclosure (podcasting) fix •The aforementioned security enhancements (nonces) One mostly annoying bug shipped with 2.0.3 as well. It gives you an "Are You Sure?" dialog when you edit comments, and adds a backslash before each quotation mark in the post you're editing. Make certain to download the patch. What's Up With The Security Problem? The security problem seems minor, but the WordPress team is fixing it before it grows into something major. It's a bug that takes advantage of the cookie you download when you sign into WordPress. The cookie in question prevents anyone unauthorized from accessing your admin panel. It's tied to your user account, and verifies that you are the authorized administrator of the account you're working on. The bug that's being fixed is one that takes advantage of a sociological trick. If someone created a link or a form pointing to your WordPress admin account, they might possibly be able to trick you into clicking the link. In the case of the one here, you delete a post. This sounds both minor and highly unlikely; but a small crack in the door can be exploited later by a dedicated hacker. And this is also the kind of bug that, a few years ago, allowed a hacker access to the Microsoft databases, from which he stole portions of the Longhorn and other codes. So yes, you do need to take it seriously. WordPress had ensured you were safe from this kind of hacking by using a utility called HTTP_REFERER. But this utility has some issues. For instance, with JavaScript in Internet Explorer, it can be spoofed. In addition, certain firewalls and proxies can strip the information it's supposed to carry out, causing some people to be unable to use their WordPress admin accounts the way they're supposed to be able to. Now, instead of the HTTP_REFERER, a nonce is used; this is a number used once. It's like a password that changes every twelve hours, and is valid for twenty-four hours. The nonce is unique to the specific WordPress install being used, the WordPress user logged in, the action, the object of the action, and the 24-hour time of the action. When any of these is changed, the nonce is no longer valid. All plugin authors will have to ensure the nonce is added to their forms and other interactive capabilities that may be affected. Upgrading from WordPress 2.0.2 to 2.0.3 As with any upgrade, the first thing you should do is back up everything: the files in your WordPress directory, the database plugin with any changes, and any data you have added should be backed up as well. In addition, it might be a good idea to do a second backup of your entire WordPress directory just in case something goes wrong with your install. Now remove the wp-admin directory entirely. Also remove the wp-includes directory, except for any translation and language files or directories you may have added; add these files to the backup files you created earlier. Finally, remove all the files where WordPress is installed with the exception of the file http://wp-config.php. Now you're ready to start your install. Download and unpack the 2.0.3 version in a separate install directory. You want to make sure you can control files and directories you copy over. Now install the new wp-admin and wp-includes directories. Install the rest of the files of the top directory, with the exception of the http://wp-config-sample.php file. Now enter the admin panel. You should see the following message: "Your database is out of date. Please upgrade." Follow the link provided to update the database, and follow the directions there. Now remove the files wp-admin/upgrade.php and wp-admin/install.php. Download the plugin fix; add it and activate it. Replace your backup files where they need to be, and do the comparisons if you've modified any of your earlier files. This should take care of the whole thing. For geeks, there is also an upgrade package that only includes the changed files. Look for it under Changes Diff (2.0.2 > 2.0.3). It consists of a zip file that is much quicker to install, but you should be certain you can handle it before using it.

Inkjet Printers: A Brief Overview

Inkjet printers are an affordable and satisfactory option for printing documents and other images from computers. They were originally placed on the market in the late 1980’s and have improved greatly in production and cost since then. Today, high quality inkjet printers are available for as low as $70.00. The reason for the low cost is the higher cost of keeping the printer supplied with ink. This is where the real profits are for printer manufacturers. An inkjet printer uses millions of tiny dots of ink to make a word or picture. For photo printing, different variations of colored dots are integrated to create images with true-to-life color. A higher resolution of dots directly relates to increased quality of printouts. There are two major technologies at work in the choice of inkjet printers, impact and non-impact. Impact printers offer dot matrix or character printing. A dot matrix printer has a bunch of tiny pinheads that touch an ink-covered ribbon. When the pinheads impact the ribbon, the ink moves to the paper. Character printing is similar to an electric typewriter, but with more control and sharpness afforded to the printing job. Character printers are rarely used anymore because they can only print words and not other images. Non-impact printers are much more popular than impact printers, because of the advanced technology behind them. Both the widely used inkjet and laser printers belong in this classification. Non-impact printers do not actually contact the paper directly when printing. The way inkjet printers do this is by emitting jet sprays of ink to form images on the paper. This is where the name “inkjet” gets its meaning. Laser printers, the second most purchased printer after inkjet, use toner and other ingredients combined with heat to apply the ink to the paper. What is going on inside the inkjet printer? The center of the machine is the print head, which holds a multitude of ink spray nozzles to create the intricate dots on the paper. Ink cartridges contain the ink for the printer and are replaced according to frequency of use. Black ink and color ink typically comes in different cartridges with color sometimes appearing in three separate cartridges – cyan (blue), magenta (red), and yellow. Another part of the printer is the paper feeder, a tray that holds the paper to be printed and feeds it into the printer one page at a time. The choice of paper is instrumental in the resultant quality of the print. Regular copier paper will not provide as sharp a print as paper with a higher brightness level. Brightness in printer paper means being extra white, which showcases the black and colors of the ink better than a duller white. Brightness also indicates a higher level of smoothness to the paper. Another factor is the level of absorption, which is helped by pre-coated paper covered with a light film to prevent feathering caused by too much absorption. Many different qualities and finishes are available in paper intended for inkjet printer use. Inkjet printers are widely used by everyone from the common man to huge corporations. For everyday use, there are countless amounts of specialized sticker labels, invitations, fine stationery, and trifold brochures to be used specifically with inkjet printers. Whatever the printing need, the inkjet printer is likely to handle the job with excellent results.

Hey Tosh got a Toshiba?

Toshiba is a Japanese electronics company. It is short for Tokyo Shibaura Denki, the name of the company produced when two Japanese electronics giants, Tanaka Seizosho (established 1875) and Tokyo Denki (established 1890) merged in 1939. This new company was nicknamed ‘Toshiba’, and the company eventually adopted this name formally in 1984. Today, the company is one of the world’s largest manufacturers of TVs, DVD players and laptop computers, among other things, and the world’s third largest manufacturer of computer chips. It focuses on digital equipment above all else, announcing in 2004 that it will no longer produce old-fashioned CRT TVs, switching instead to only manufacturing LCDs. Generally, and similarly to other Japanese electronics manufacturers, Toshiba’s market position is that it is not cheap, but instead produces high-quality, well-designed products. Outsourcing has dented this reputation with some companies in recent years (notably Sony), but Toshiba’s reputation still holds strong – they do outsource, but make sure to only choose high-quality manufacturers when they do. Today, Toshiba is investing heavily in next-generation versions of several technologies, including HD-DVD (high density DVD, a DVD that can hold much higher-quality movies that current discs can) and SED (a display technology that is widely seen as the likely successor to LCD). However, Toshiba has also seen its fair share of controversy, which makes some reluctant to buy its products. In the ‘80s, Toshiba sold equipment to produce quiet submarines to the Soviet Union, prompting a diplomatic crisis between the US and Japan and the arrest of two Toshiba executives. Most recently, Toshiba bought Westinghouse, one of the world’s largest manufacturers of nuclear reactors, hoping to cash in on many countries’ plans to build a new generation of nuclear power stations, and earning them the ire of environmental groups, who went as far as to hold a demonstration outside Toshiba’s headquarters.

Going Wireless With Your Headphones

If you're looking for the latest in wireless headphones for your enjoyment and private listening, whether to TV, stereo, home entertainment such as theater, iTunes or Ipod, you might do well to look at the highly recommended Sennheiser RS 130 wireless headphones. These state of the art wireless headphones provide an advanced communication via FM radio frequency. The result is clear sound with no background noise or static and nearly 500 feet of free movement. The headphones have terrific surround sound effects and weigh less than ten ounces. They are ergonomically designed to provide hours of comfort. The features of the Sennheiser RS130 wireless headphones include a base station for the headphones that is attractive and stores the headphones whre they are not in use and also charges the batteries. Batteries are NiMH type, and their single charge keeps them going for 22 hours of your listening enjoyment. The wireless headphones base station has a 900 MHz high performance transmission, also wireless, that delivers a playback that is very impressive in its high fidelity capability. Its transmitters use Sennheiser's customized system of intelligent automated tuning. This seeks and then chooses the best of three channels from base to headset that are available for delivery of sound to the wireless headphones. A music professional and online consumer music advocate reviewed the Sennheiser wireless headphones. He noted the worldwide acclaim of all Sennheiser audio products as well as its firm's state of the art designs and manufacture. He said that the Sennheiser RS 130 wireless headphones lived up to the Sennheiser quality reputation by delivering a high performance sound, as well as top notch value and ergonomically designed comfort. He said that he tested the Sennheiser wireless headphones both inside and outside, in conjunction with his speaker system - a ZVOX 315 - and his iPod. The ZVOX 315, by the way, is a surround sound single box speaker system that uses a single cable to connect to an mp3, an iPos, portable music instrument or equipment, or a computer, TV, CD player, DVD, satellite or clock radio, game console or any other device that has a jack for headphones or an audio output of some sort. He also used his iTunes from his laptop. What he found was that the Sennheiser RS 130 wireless headphones gave him unparalleled listening without any disruptive noise. His recommendation was that anyone who was looking for a set of wireless headphones for less than $200 to be used with their iPod, their iTunes, their TV, stereo, or home theater, didn't need to look anywhere else.

Extend The Life Of Your Laptop Battery

If you are the owner of a laptop computer, you know how frustrating it can be when you are working on the laptop and your battery is low. If you are constantly on the go, it is sometimes difficult to find a place to plug in your computer to let it recharge. There are a few things that you can do to help you take care and extend the life of your laptop battery. General caution should be observed when running the battery of your laptop. A laptop should be plugged in to the AC adaptor whenever possible. This will ensure that your laptop battery is always charged and ready to go when it is needed. Another tip is to not expose your laptop to extreme weather conditions, especially very cold temperatures. A cold battery will run much slower than one that is warm. Also, try not to use your laptop for long periods of time without recharging the battery. This can cause information to be lost if the battery sudden stops working. When using your battery on your laptop, remember use as little power as you can by adjusting the settings on the laptop. This will make your computer go inactive when not in use for a certain amount of time. Adjusting the power setting is easy if you go into the control panel and set the display time. It is also possible to adjust the brightness of the screen display to help the life of the laptop battery. Remember to turn programs off that you are not using. This will waste battery usage quicker. Also, running movies and videos will quickly drain the battery charge. When using your laptop battery you will want to make sure you check the battery charge frequently. Charge your laptop as soon as you see the battery getting low. Whenever you can, plug in your computer. It is a good idea to always plug in your computer so that it is ready to go. Also, take care of your battery. It is important to clean the laptop battery and keep it free of dust and debris. Using canned air or a cotton swab on a regular basis can do this. The battery will run longer if it is cleaned frequently. Another tip is to have an extra battery on hand. These are easily purchased. Have at least one fully charged at all times for a quick battery change. Some laptops can run with two batteries. Most laptops are also compatible with external batteries that can easily be added and changed when necessary. Battery charges that work in the car are also good options for anyone taking their laptops on trips. Also, if you are purchasing a new laptop computer, consider buying a smaller, lightweight version. These are more efficient and are able to run longer on a battery charge than the larger laptop versions. Following these basic tips can help extend the amount of time your computer can run with a battery.

Why Wireless DA Is A Multi-Billion Dollar Industry

Wireless Directory Assistance (DA) is a virtual directory that offers a fast way to get directory-dependent applications online. It is a multi-billion dollar industry that has a window of opportunity to develop and offer a higher value and more flexible services to subscribers. With billion of calls to DA, approximately a third of which generated by wireless users, it has become the cash cow of telecommunications carriers. Virtual Directories Virtual directories are not unlike meta-directories. User data can be accessed from different repositories. Meta-directories copy data into a new repository that needs to be created, maintained and synchronized. Updating data can be very difficult especially when there is frequent change in source directories’ data. Business units may find the idea of creating a second repository for customer data objectionable since it will be outside of their control. Virtual directories can access the attributes requested from each directory or database on the fly. A cache is used by the software to speed performance but data doesn’t usually get to be scored locally. Virtual directory deployments cost substantially less than other alternative strategies. The virtual directory technology should be considered for any plans to customize an application. It can also help applications that are not sophisticated enough to deal with more complex directory mechanisms such as Lightweight Directory Access Protocol (LDAP) referrals. A virtual directory can follow the reference to locate the data and return it to the application. Its potential weakness lies in the fact that it can only be as good as the directories behind it. A meta-directory having its own data source may prove to be a better choice if a directory tends to go down frequently or offers poor response. Virtual directories however, have load-balancing and fail-over features that can be configured to redirect a request to an alternative data source. In instances where a connection drops in the middle of a request, the outside directory retries another repository and returns the rest of the data. An additional repository is not created but another layer of complexity is. This is because virtual directories require applications to access information indirectly through the virtual directory server instead of going to the directory that actually holds the data. There are some apprehensions with the added layer of infrastructure because if anything happens to the web single sign-on, the critical applications are down. Virtual directories are recommended for use for applications that can access only a single directory when the user data or attributes reside in many places. It is also offered as an alternative to meta-directories when attributes in source directories change frequently. It can be used as a directory migration tool as it lets administrators migrate to a new directory architecture without updating all the applications that depend on it. These applications are presented with a view of the old directory and its schema structure. Very large repositories can be broken apart to improve writer performance and reduce downtime. Wireless Directory Assistance The industry focuses its attention on Enhanced Directory Assistance which hopes to increase value for wireless users. This is because wireless directory assistance comes in second to subscription with regards to the largest source of revenue as analysts project the total amount of access fees to continue increasing. Wireless customers are looking for more informative and user-friendly services to enable them to be more wirelessly productive and efficient. A research conducted by the Wireless Commerce Monitor Study revealed that one in three subscribers use Directory Assistance on their wireless phones. The remaining number either use online directory assistance, mapping services and the newer services including Enhanced Directory Assistance, wireless short messaging, wireless e-mail notification and wireless mapping and direction services. Barriers that have been identified with regards to qualitative work are inaccurate, incomplete or irrelevant information and low perceptions of value for money. Wireless and Internet providers compete for most of the said Directory Assistance customers. The research further revealed that more than half of wireless users are using two or more Directory Assistance solutions. This would seem to support the thinking that there is not one form of assistance service that would fit everybody in the same way that one person will not always use a single form. People tend to prefer and choose from voice and electronic solutions depending on the situation. It would be advantageous to the wireless industry to continue developing wireless as a delivery mechanism for Internet applications. There is a need for Directory Assistance providers to prove to prospective business partners that Directory Assistance services actually stimulate revenue. This is especially true with small business advertisers who want to see real value. Majority of those using Directory Assistance on their wireless phone have used it for the purpose of contacting or receiving information with regards to business. The percentage is very close to the levels of inquiry seen with online methods. Another important aspect of the study revealed that the conversion potential or the proportion of actual purchase as a direct result of the inquiry is considerably strong. The Cellular Telecommunications Industry Association together with the majority of the largest wireless carrier proposes to include wireless phone numbers in a data base accessible by dialing 411. Those who oppose this move say that it compromises user privacy and thus is totally unnecessary. However, backers of the directory insist that privacy remains paramount in their agenda. The group will use one unnamed aggregator to store the number in a data base and such numbers will not be published and posted on the Internet or sold. These numbers will only be available to 411 operators. Users are required to make a formal request to have their number included in the directory. All numbers with no request shall remain private. There will be no additional cost incurred, whatever the option is taken. Some have seen the benefit of having a wireless directory include all the business numbers as it can provide more company employee accessibility to clients. Protection from unsolicited wireless calls on one hand and the consumer’s right to directory assistance on the other constitute the basic differences in opinion of each side’s proponent. Wireless directory assistance will be different from tradition landline directory assistance or printed white pages type of directory. Mobile directory assistance benefits consumers in terms of location capabilities. Carriers likewise stand to benefit from this type of directory service since operators can charge for these services. The combined features of Internet type directories and location capability is a sure fire revenue generator for carriers. This just goes to show that any service that meets the needs of consumers will turn out to be quite a very lucrative business.

The Latest Patent Applications: Kernel Of Technological Advancement

The value of freedom in a country is priceless. If one country has freedom of speech and thought then they are sure to have a bright future ahead of them. How so? If a society has freedom of thought then they are free to explore their interests or whatever else that may pique their curiosity, which could eventually lead them to great knowledge and amazing discoveries. Take the United States for example. America has surpasses all the other countries of the world not only economically but technologically as well. Although it is true that most technological inventions and other scientific discoveries did not really originated from the Americans themselves but rather are attributed to citizens of other countries. However, it is undeniable that these technological inventions are enhanced and further developed in America. Thanks to America’s innovative patent system these technological inventions are put to better use. Just what is a patent you asked? The term “patent” is generally defined as a set of exclusive rights granted by the government to a person for a certain period of time (usually for 20 years) in return for the regulated, public disclosure of some information about their invention. It was Thomas Jefferson who initiated the first national patent system in the United States of America during the year 1790. From then on, this exclusive right has been protecting the inventor’s interest by preventing other people from copying, using or selling the already claimed invention. So how exactly are these patents significant in technological advancement? According to the World Intellectual Property Organization or WIPO about 90% to 95% of all the world’s inventions can be found in patented documents. However, these technological inventions comprise only a small percentage of all the patents that are applied for and granted. Therefore it is safe to assume that the latest patent applications are the kernel of technological advancement. Take a look closer at the Internet. This technology has undergone numerous changes from the time that the concept of the World Wide Web was first introduced a few decades back. In an attempt to put Internet into better use, various inventors who aim to further develop and enhance the existing models filed numerous patent applications that are related to this technology. One of the latest patent applications is called system and method for scoping searches using index keys. The invention involves a set of index keys, which is to be included in an index search system that are related with the scope of the search instead of the content of the documents, which are the target of the search. These so-called “scope keys” enables the scope of the search to be customized, thus reducing the number of documents that a search supposed to sort through in order to acquire the results. Another latest patent application that is related to technological advancement in the Internet is the “system and method for performing a search and a browse on a query”. Now, in this invention a search and a browse on a single user query is executed. Then a refined query is chosen from the results of the first user query. After that, a list of concepts from a first directory that are related with the refined query is acquired. Here, the “concepts” are categorized in a hierarchical relationship. Concepts with broader scope are obtains a higher position. Meanwhile, the concepts with narrower scope get a lower position in the hierarchy. In addition, a list of web sites that related with the search concept is also acquired from a second directory. The forming intent-based clusters and employing same by search, is also a patent application that is related in further enhancing the Internet. This patent application is associated to a system and method that will be use for identifying and forming intent-based clusters based on search requests that were sent by the users to the search engines, as well as to the search engine utilizing the formed intent-based clusters to answer the search requests made by the users. To be more precise, the invention is associated to recognizing and utilizing intent-based clusters so that a search made by a user with similar intent may receive a respond more quickly and efficiently. Most importantly, with search results that more directed to the search of the user. All three patent applications are dedicated in making the Internet searching process less complicated and not to mention, much more efficient in terms of coming up with results. Today, patents are considered as the leading source of technological information that is vital in technological advancement. Thanks to the innovative Information Technology industry, particularly to the Internet, the general public can now easily access these constructive documents. Just about anyone who is familiar with the Internet can browse through different patent databases available and obtain the specific patent document that they needed. There are various patent databases that are accessible by the public, USPTO, EPO, JPO, to name just a few. For instance, if you are looking for patents that are related to a certain technological area you will find countless information regarding the entire process of technological innovation, such as the evolutionary path of a specific technology, it’s technological development, technological diversification, technology merges, as well as the major players in specific technological area, and the key points of the specific technology. The secret behind each major technological advancement and inventions are thousands of patents that were applied, filed and then put it into practical use. Fortunately for us the public are well aware of the significance of patent application in developing tomorrow’s technology. The number of patent applications is growing at an enormously fast rate. Inventors not only from America but from other countries as well, are diligently working on their inventions as well as on patenting their ideas -- a clear indication that our nation’s future is indeed in good hands. For as long as the American government continues to nurture innovation, then they will remain as global leaders both in economy as well as technology.

Press Release: Why SEO Experts Should Not Use Press Releases

Rumor has it that press releases are the next big thing in the SEO business, and many companies are spending top dollars trying to write the next big press release announcing the next big balloon breaking technology. But is this really the next big thing?

By definition, a Press Release is a kind of news item released by the company on whom the news is being reported. As such, you will have to compete with all the other press releases and hope that your will get picked up.

Why Will Your Press Release Be Trashed?
1) Unless you are writing a press release about Microsoft, Adobe, Sony or one of the other mega-companies, or at least about a company that is relatively well known, forget about it. Journalists and news editors receive thousands of press releases a day and there is no way that they will waste more than a quick glance. So why should you pay a company seven to eight hundred dollars for them sending your press release to thousands of editors and journalists when they are going to junk it anyway?

2) Unless you are announcing a truly revolutionary product or technology (which I assume you are not since you are only interested in using the professionally paid and written press release to boost your search engine rankings), whatever you make up or announce such as some new free deal or new portal offering something unique, your chances of being picked up are very slim. Yes, the PR companies will tell you that they have vast experience in writing Press Releases that will make yours stand out and get picked up but this is not accurate. The only way your PR is going to get picked up is if it truly is something out of the ordinary or something that no one has ever thought off.

3) Unless you plan to spend millions of dollars and then just by sheer volume your site will go ahead in the search engines, this is not a good option. Why? If you send a large number of press releases then these will be placed on the different PR companies websites main page. Since most of these home pages have a very high page rank, your site will get a boost. The question is whether this boost is worth the large amount of money you will put into the PR companies pocket. No it is not. Use that money to buy (though I do not recommend this) links from high-ranked websites and you will pay less and receive more benefit.

4) Any press release, even if it has been accepted, will remain on the different pages for just a short time, making the time and effort and even more so the amount of money you paid fruitless.

Conclusion:
A press release is useful if you wish to contact the press and maybe get some free publicity, but it is of no use if you wish to use it as a tool in order to advance your website in the search engines.

Media Players: Entertaining Us Through The Ages

You have been entertained with media player software for years, so it may be that you have not even noticed it. How could you, it looks so real. Everyone has a favorite or several favorite movies that they have to watch repeatedly; movies that they just cannot get enough of. Let us peek into how media player software has improved the experience of watching a movie today, and a little history on how we got here.

Going way back in time, media player history started around the 1700s when magicians in Europe entertained the royalty with a little smoking mirror. The magicians actually used lanterns to produced smoke. However, it seemed to entertain the court. Later on in the early 1800s, the ability to project images from far away onto a screen was invented. With man’s insatiable appetite to entertain, technology continued to develop. Silent films came into vogue and eventually fade, stop actions, CGI and Virtual Reality landed square on our square movie screens.

It is hard to believe that media player software is connected with magicians’ lanterns and silent films, but that is the path. Sometimes reality is stranger than fiction. There is no way to cover totally the entire film history that lead up to CGI today, but hitting the highlights is both interesting and entertaining.

Media players and digital software have taken off because of several films and has continued to grow in the movie industry. Of course, everyone should remember the first Star Wars movie, but it was not until the Star Wars, Episode I – The Phantom Menace in 1999 that CGI played a major role in the movie. Interestingly over 92 percent of the movie was nothing but CGI effects on the movie screen.

Other films led up to the popular media player inspired Phantom Menace movie. A full 10 years before was released a movie called The Abyss used media player software for the water scene of faces. In The Abyss, 3 – D special effects were used for the first time. Audiences were captivated by it. Virtual Reality was brought to screen in the Lawnmower Man movie in 1992. After that, the Walt Disney Company made their first film in 3 – D with the hit Toy Story in 1995.

It only got better as media player software guided the next movie, Titanic in 1997, into the outer stratosphere of technology. No one can forget the scenes of the ship crashing into the iceberg or the fateful breaking in half of the ship! In the new millennium, CGI got into the full swing of influencing children’s movies such as Shrek. The software and special effects were toned down before its release to the public. Why were they toned down? Because the characters in Shrek were so real, Disney felt it had no cartoon affect, and children might be turned off by the movie.

It is hoped that in this short review of movie history, anyone can see and understand the importance that media player technology has had on the entertainment industry. In the future, we might have to be warned that all characters in a movie are CGI and Virtual Reality created. What a concept to think about, and who knows when it will happen.

Let’s take a look back in time to see how the computer has evolved.

In many ways, man has been using computers for millennia: an abacus is, after all, simply a very basic form of computer. The first mechanical calculator (the ‘calculating clock’) was built in the 17th century. Programming with punch-cards has been around for about 200 years now.

It was in the 1940s, however, that the first electronic, digital computers started to appear – that is, computers as we know them today. These computers were massive machines, filling a large room (in some cases, a whole building) and yet having less computing power than a simple calculator does today. Reprogramming them often required extensive amounts of physical rewiring, as the only way the computer knew what to do was by how it was connected together. Still, these computers were helpful in the war effort – most famously, the British code-breaking computers at Bletchley Park that broke the Germans’ code is widely thought to have shortened the war by years.

Fast forward to the ‘60s. This was when wires and tubes were replaced with the transistor – an overnight leap forward in technology that reduced computers’ size to an amazing degree, replacing the hefty vacuum tubes that somewhat like those still used in CRT TVs and microwaves. Combined with the invention of semiconductor integration circuits, by the ‘70s, it was possible to make personal computers small enough for people to have in their homes.

This is generally regarded as being the beginning of the ‘computer age’, as the popularity of home computers quickly drove prices down and made them very affordable. Computer companies sprung up left, right and centre, hoping to carve themselves a piece of this exploding market. The result was chaos and buyer confusion, and few of them survive today. However, the stage was set for a huge computer battle that led to the machines we know and love today.

How To Start Your Career In Information Technology

Many newcomers to Information Technology get an overly-optimistic picture of the field from tech school ads that continually make note that "an average MCSE salary is $80.000 a year!".

And if someone's thinking of getting into IT and goes on the internet to do some research, they're met with the opposite end of the spectrum - complaint after complaint about how much IT is a terrible field, you can't break in, there's no room for newcomers, etc.

As usual, the truth lies in the middle. As much as I love the IT field, I'll be the first to say that it's often hard to get that first job. Many tech schools have a job placement department, and that can be one big plus in their favor.

What if you don't have that resource working for you? When you're breaking into any field, IT or not, you must not make the classic mistake of sending a ton of resumes and waiting for the phone to ring. The odds are that it won't.

You must get out and talk to people. The term "networking" doesn't just refer to allowing computers to talk to each other; it also refers to people talking to each other. In your case, you've got to get out and meet people. Check the business section of your local newspaper. There will be dozens of networking meetings listed in there. It doesn't matter that you aren't in the field yet; go to these meetings and meet people. Initiative is never a bad thing.

And once you get that first job, make it count. Show up on time and do what you say you'll do. If you don't know something, dig into Google and find the answer or ask a more knowledgeable colleague. (Just doing these few basic things will put you way ahead of the pack.)

Getting started in IT is as tough as breaking into any other field. Having worked in a few different jobs in my life, though, I can tell you this: No other field in the world rewards individual drive, initiative, and achievement like Information Technology. The fact that you have to work so hard to get in will make your eventual and unstoppable success just that much sweeter.

Do the world’s poor children really need a $100 laptop?

The chairman and founder of the Massachusetts Institute of Technology Media Lab recently launched the $100 laptop to the world’s media. Is it necessary?

MIT rolled out a non-profit association, called One Laptop Per Child, to design, manufacture and distribute laptops that will be provided to various governments at cost price and issued to children by participating schools on a basis of one laptop per child. These machines will be rugged, Linux-based and so energy-efficient that hand cranking alone can generate sufficient power for operation.

The internet connectivity question is addressed in a few different ways, including the use of Wi-Fi, WiMax, 3G and satellites, as well as fibre, coaxial cable and plain old telephony. Competition, deregulation and the fact that the developing world is now the only new telecommunications market, will all perhaps contribute to wider reaching availability, greater bandwidth and, most importantly in these countries, lower connectivity costs.

The solution offered is a $100 laptop: a durable, versatile machine at a price the developing world can afford. The fact that this has been achieved is actually a remarkable achievement, the very notion of which until very recently was shunned by industry leaders as impossible.

The strongest argument in favour of this cheap laptop idea rests on the laurel that the greatest assets of a people are its children, and so the highest social priority is on the education of these children. Throughout disease, natural disasters, war and poverty, education features as the primary solution to the problem.

Most educators would argue that effective learning stems from a fundamental level of personal curiosity about a subject, and in a sense the ability to self-teach. The key point here is not so much what each child knows so far, it is rather the perspective that they can bring to bear on a problem. It is well known from case studies that network learning, augmented by technology, computers and Internet connectivity, bears heavy fruit in academic terms.

The economics of a $100 laptop base around the following: Around half the purchase price of a new laptop is taken up by the cost of sales, marketing, distribution, and of course the ever shameless profit-margin. By sidestepping the entire retail market and distributing directly to governments in the absence of profit-driven aims a huge chunk of the price per model is evaporated.

Physically the most expensive aspect would be the display. The use of an MIT technology called E-Ink that offers the potential to be as low as 10 cents per square inch and offer daylight readable clear resolution is promising. The processor, memory and power can be stripped down, as the functionality of the machine need not be so advanced beyond surfing, email and word processing all as open-source, slimmed down software that takes up little computing resources.

It’s now without doubt that the $100 laptop will happen. As to whether it’s a good idea? Everything about says yes, although the sociologists have yet to gather their argument on this one it seems.

Technology And The Whistleblower

As the meeting comes to a close, your boss smirks with an self assured arrogance. He then says that you should seriously consider his offer, because he has it on good authority, that there may be a very localized downsizing in your department. Wouldn’t it be nice to smirk back and just say “no thanks”. This scenario plays out more often then most people realize. With all of the recent business and government scandals there were a lot of people who knew that books were being cooked, laws being broken and the health of the public being put at risk, just to keep profits high and investors content. Many people felt that there was nothing they could do against powerful executives and corrupt bureaucrats. The credibility of a low level employee compared to that of a ‘successful’ corporate executive is a huge hurdle to overcome. Also, corporate lawyers are there to defend the company, even from internal hazards. So, once a person decides to speak up, they must be prepared to have their credibility brutally attacked and the onslaught of legal preceding from an all-star team of corporate lawyers. Just the thought of legal proceedings can stop a person from making the ethical choice. It’s easy for people to be vilified by their employer, at which point the credibility of the person speaking out is destroyed. How is possible for a single person to fight a company or government with infinite resources? Many years ago, it was practically impossible. However, the “digital revolution” may have changed the balance of power. For a “whistleblower” to be effective they need proof of wrong doing and a method to communicate those issues to the public. The availability of compact electronic devices such as digital audio recorders and digital cameras allow an individual to document many of the issues and bring the power back to the whistleblower. The first piece of technology that should be in every whistleblowers repertoire is a digital audio recorder. These devices are so small that they can be put in a shirt pocket without being noticed. Once you decide to “blow the whistle” you should start recording all of your conversations. Keep a log of the items discussed, so that you can refer to the appropriate recording when needed, otherwise you can spend hours going back over the content. The best part is that these devices are not expensive. A digital voice recorder costs about $100, or many times MP3 players have a microphone built into the device, so they can be used to record conversations. Another device that is very handy is a voice modem with telephone recording software. This will allow you to, hook up your phone, and record any conversations that occur over the phone. If you get fired before you have all the evidence, sometimes telephone conversations, with the people in power, can help to document important facts, because people very rarely think they are being recorded and say things that they probably should not have. Make sure you check your local laws regarding conversation recording. In most places it is legal to record with one-party consent. One-party consent means that if you are involved in the conversation, you do not need to notify the other parties that you are recording the conversation. In Canada, one-party consent is the law. In the United States it is a little more complicated, as some states have their own regulations. You can refer to this recording law chart (http://www.snakeoil.ca/docs/recordinglaw.html) to determine what laws affect you. If in doubt, speak with a lawyer. The third device every whistleblower should have is a digital camera. Many times the violations are in manufacturing or packaging, which could be a public health concern. These can be very hard to document and prove, since the paper records may be manipulated. A picture says a thousand words though, and will help authorities uncover doctored documents. When taking pictures be very cautious as most companies prohibit camera’s on their premises. Many cell phones are now equipped with digital camera’s, so they are easier to conceal. Take as many pictures as you can and try to prove the date you took them. Some camera have a date stamp feature, even though this is easy to manipulate. The best option is to take a picture of the daily newspaper beside the offending subject. This is very hard for lawyers to argue against and disprove that the violations did occurred on that particular date. The last piece of equipment needed is a computer. When the authorities begin investigating your complaint, you will need to produce your evidence such as documents pointing to the issues. Most corporations are moving towards a paperless environment, which means that these documents will only be accessible by a computer. The other important part your computer plays, is to backup all of those images and audio recordings. Make sure your computer has a CD writer or DVD writer. Take these backups and put them somewhere secure, like a bank deposit box. One area of concern is the removal of corporate documents from the office. This can violate many legal agreements you may have signed. If you are worried about this, there is a very simple solution. Backup all of the evidence files at work and stash them somewhere in the office. In the ceiling or in duct work is a great place. Basically, anywhere nobody ever looks. When it is time to produce these documents, simply tell the authorities that you have stashed them in a safe place at the office. The evidence is kept safe and you haven’t violated any agreements, a win-win situation. In the future, companies may begin banning digital devices from the workplace for the exact reasons being discussed here. However, if were are persistent, it may go the other way and corporate behaviour may change, which is the ultimate goal of being a whistleblower. The days of “plausible deniability” and “disgruntled employees” are disappearing quickly.